Brush on Gel

PREPARATION:

1. Protect working surface with paper towels.


2. Push back cuticles with manicure stick.


3. Trim and file nails; lightly buff nail surface to remove surface shine.


4. Remove dust; wipe nails clean with acetone polish remover.

TIP APPLICATION:

1. Select the correct size tip for each finger; set aside in order before beginning. (If needed, file sides for accurate fit.)


2. Hold tip with Easy-Apply Tab and apply Brush-on Gel to back well area of nail tip (the part that adheres to natural nail).


3. Slowly lower tip onto natural nail, hold firmly until set. Repeat this for rest of nails/fingers.


4. To blend tip with natural nail apply and hold wet brush from brush cleaner along seam of each tip.


5. Next lightly buff seam if necessary but AVOID excessive filing on natural nail surface.


6. Remove Easy-Apply Tabs by gently bending up and down - Do Not Twist Off.


7. File to desired shape and wipe off any dust.

GEL APPLICATION:

1. Use fresh paper towels free of dust particles. Set up your three bottles in order as needed.


2. Avoiding skin and cuticle area, apply an even layer of Brush-on Gel to one nail as you would polish.


3. Next, over WET GEL, use brush from Brush Cleaner and dip into Activator.


4. Apply a thin coat of Activator over WET GEL as you would apply polish.


5. Wipe brush on paper towel and return to Brush Cleaner to keep clean and soft.


6. REPEAT these steps on all ten nails.


7. A SECOND LAYER of Brush-on Gel and Brush-on Activator is now applied repeating step 2 above.


8. For an opaquer look, apply a third layer of the Gel/Activator combination.


9. After all ten nails are completed, finish with a thin layer of Brush-on Gel on all ten nails as you would top coat.


10. Brush-On Gel products will self-level and set to a hard, smooth, and shiny surface in under 5 minutes.


11. Enjoy your Nude French manicure as is or finish with your own nail polish for a different color.


12. Tip: You can use the Gel/Activator combination on toenails for a fast, fresh pedicure.

FILL-IN:

1. Remove polish with non-acetone remover.


2. Gently buff area of nail growth where overlay meets cuticle.


3. Apply a small amount of Brush-On Gel to base of nail.


4. Apply Brush-on Activator only to area where Brush-on Gel was applied.


5. Repeat steps 3 and 4 from "Gel Application";.

REMOVAL:

1. Do not force or pull off nails. Trim off as much artificial tip as possible.


2. For quick, easy removal, use KISS Glue OFF, or soak nails in acetone-based polish remover until soft.


3. Wipe off softened overlay and glue; repeat process as necessary.